Видео

Great video. What do you think of a cigarette lighter causing battery to drain?

I have a 2004 and I replaced my temperature sensor and my fans are still not turning on so it runs hot any suggestions

Ima try this 😢 hopefully that’s the problem since I have the same symptoms on my 92 accord

You need a jack to support the breaker bar

Great video. Perfectly explained. Thank you

How do you know if it’s the crank sensor off the start of mine sound the same just won’t start my belt broke and wrap all the way around the harmonic balance but I have it all cleaned now

Saab 9-3 1.8t 2003 here. Drove fine, nothing wrong with her. One day later, it wouldn’t start at all, but did crank! I can hear it crank and can hear the fuel pump priming. Mechanic told me to replace the CPS, so I did. Still no start! Steering wheel doesn’t ‘click’ anymore since I replaced the CPS. New fault codes: Stability control failure + traction control failure. What could be the culprit?

That’s bs , chevy should be ashamed , it’s an entire task just to rectify the AC ? 🤦🤦🤦🤦🤦

Coolest fuel pressure gauge i have ever seen! Great idea!

just got done doing 3 different Starter starts, still cant budge mine. sickening,. because Im doing my timing belt & completely STUCK, with this d__ frikkin Crank bolt. Im now using a small flat chisel trying to cut a tiny dent into it at an angle, so I can hit the end witha hammer & try to get it to budge.

Thanks for a info!

Thank you sir!

Nice kit! Alot of clever adapters you have there. I love how versatile it is.

The wiggle test👌

The starter turn-over trick worked after duplicating everything you did on your video. Thank you!!!

I feel chevy should recall the traverse!! I am not rich i am disabled but my hubby works. We had a car my mom gave us but the front end was bad and it was falling apart. I am a grandmother and I am the 1 person who was available to take all 8 of my grandbabies to and from school. Well my hubby and i were afraid the car would break down. So we went to find a car it had to have 3rd row seats. Cause i have bunch of kids to transport. So we decided the best option would be new. I am 54&he is 60. This was our very first new car. And i am so upset with this car. Its only 7 yrs old there should be nothing wrong with it. But the air stopped oh and that was another thing the new one had to have working heat and air. I have had nothing but troubles with this car. I feel ripped off. I feel like chevy used cheap parts. And the only one who is benefitting is the parts people. Cause I keep having to replace them. Its a money sucker and it is NOT right. The interior is even cheap. I pay 520. A month i only have a few payments left. But im right back where i started. With a car that has so many problems and im scared everytime I drive it. If chevy wont make this right. I will NOT ever buy another chevy. Infact i will tell everyone i know and meet NOT to buy one either. Fix this

Happened, to my 14 odyssey, AFTER ONLY 4 months. Praying, it will just need another belt & tensioner. Brought, the full kit, it off of ROCKAUTO. OEM PARTS.

Wow

Thankyou

No one has done the v8 one and I can’t find it😭

Thanks!! Wish you showed how to get the pipe nut off the EGR - looks like no room. What tool did you use? (also can you really bull into it w/o breaking anything?)

So by fixing the camshaft sensor p0340 that also fixed the code p1336 crankshaft code?

Many thanks from Belgium. Very usefull. I own you a Belgium beer.

I'm lost lol 😂😂😂

Will you make a video about how you repaired your switch

THANK YOU soooooooooo much for this! This has been driving me crazy for MONTHS! I still have to deal with a P0336 even after replacing the crankshaft position sensor and some wiring, but at least I can start and drive the car regularly now! I can't thank you enough - this video has saved me so much time and frustration!!!

Thanks

Can i use a tester with a light to test the wires on my o2 sensor plug? Mine shows no signal its a new one

after this video you never used Verdict D7 on any of the cars after all this time. This confirms what everyone is saying that Verdict D7 is a door stop

Excellent explanation! Thank you!

Shouldn't the piston be at bottom dead center, if anything? If the piston is TDC there's no room for the camera.

Thanks, I'm going to look there now.

Would you have a link to where I can find this equipment (ruler) for coil testing?

Does anything have to be reset after the new box is installed?

Makita tw1000 works as a charm, just in 2 seconds the bolt is out.

Good thing your engine cranks clockwise... My Accord cranks counterclockwise, so I can't use that method to loosen the bolt.

What is the name of the relay holder with the leads on it.

THANK YOU!!!! I didn't know what kind of tool to use!! I was going to use a wrench,,, yet,, it was hard to get to!!,,, I got a wrench!! Thank you again, BOSS!!!!

Thanks but the title of your video have so wide ranging

3 of my front coils on my 2002 Chrysler seabring works in the front but the 3 in the back dont work so it runs shallow and changed all 6 coils and spark plugs and still doing the same thing maybe the coil was cracked

Both of my fans kick on when a/c is turned on so I don’t think it’s a relay issue, I just replaced heater fan sensor and switch. To no avail when engine warms cooling fan doesn’t turn on?

Harbor freight sells a old-fashioned corded impact gun that delivers a impressive 1050 foot pounds, and it’s $50 It’s ugly , it’s big, but it works!

Thank you for help

Me and my dad put a "OEM" timing belt kit from ebay in my 2006 pilot. Well guess what just broke.... we are hoping the damage was minimal like yours was. Where would you suggest buying the new belt and tensioner from? Also did you replace the ebay pullies or just leave them in.

Did you end up getting your pigtail?

This scanner are like guitars you must know how to play it,,,

Ramon, always enjoy your ingenuity! We need an update on your new custom tools and equipment.

Omg !! You have just totally helped me out 👍what a fantastic bloke you are !!! Thank you thank you thank you ! Window closed car locked 👍👍

What was the issue again? I couldn’t hear it

Dang man, I used this method but I couldn’t get it out. I put more grease on it hope I can get it out tomorrow or sometime later